Arming Without the Remote Control

You can arm the system without using a Remote Control by pressing the ARM button on the Console.  Arming this way will ALWAYS arm the system in the Delay Mode.

SOUNDING THE PANIC ALARM

Master and Key Chain Remote Controls
Pressing ARM and DISARM (at the same time) trips the alarm, even if the system is not armed, but it doesn't dial out unless you arm the system first.

Master Remote Control
Pressing [PANIC] trips the alarm, even if the system is not armed, but it doesn't dial out unless you arm the system first.

TROUBLE ALARM

If you hear a repetitive trouble alarm when you try to arm the system, there is a problem and the system does not arm.  You can:

• Correct the problem - First press [DISARM} to stop the trouble alarm.  The, correct the problem.  Then, arm the system again.

• Ignore the problem - While the trouble alarm is sounding, press [BYPASS].  The indicator(s) for the problem zone(s) flash rapidly.  Press [ARM] to arm the system.  The problem zone(s) is/are not be protected but all other zones arm.

 < prev | Home |  next >